• Aluminum Anodes
  • Aluminum Anodes
  • Aluminum Anodes

Aluminum Anodes


Brand: Max-Prop


  • Description

    Help protect your Max-Prop with a Aluminum Anode. Make sure that you always keep the Anodes in good condition. They must be replaced at least once a year.

    The Max-Prop Anode has a metal ring molded into it. This metal ring goes around the entire diameter where the screws attach the Anode to the propeller. This ring disburses the electrical current through the entire Anode giving it a much longer life.

    Even with the metal ring PYI recommends when installing the zinc that you clean the flat surface of the zinc and the back of the propeller so that you will have good contact between the zinc and the prop. This will greatly increase the life of the Anode.

    We only sell Mil Spec Anodes. Individual Anodes do not come with screws.

    It's always a good idea to have spare aluminum anodes on hand, you never know when you need them. We do offer Aluminum Anode Kits which consist of three aluminum anodes and all the necessary screws. This is a great cost effective solution versus buying multiple aluminum anodes individually.

    Prepping your propeller?

    Check out the Barnacle Dissolver to clean your propeller. It's a safe easy way to clean the barnacles off your propeller.

  • Anode & Screw Sizing Info
     63mm and 90mm - HUB DIAMETER
    Fits Shaft Diameter

    63mm: 3/4" to 1-1/8" or 22mm to 28mm

    90mm: 3/4" to 1-1/4" or 22mm to 30mm

    Zinc Bolt Pattern

    3 bolts with 1.82" or 1.7" center to center on the bolts

    Each zinc has 6 holes to match the two different three hole patterns

    70mm and 99mm - HUB DIAMETER

     

    Fits Shaft Diameter

    70mm: 1-1/8" to 1-3/8" or 30mm to 35mm

    99mm: 1-1/4" to 1-1/2" or 30mm to 40mm

    Zinc Bolt Pattern

    3 bolts with 1.97" center to center on the bolts

    Each zinc has 6 holes to match the two different three hole patterns

    83mm and 110mm - HUB DIAMETER

     

    Fits Shaft Diameter

    83mm: 1-1/" to 1-3/4" or 35mm to 45mm

    110mm: 1-1/2" to 1-3/4" or 35mm to 45mm

    Zinc Bolt Pattern

    3 bolts with 2.5" or 2.74" center to center on the bolts

    Each zinc has 6 holes to match the two different three hole patterns

    100mm - HUB DIAMETER

     

    Fits Shaft Diameter 100mm: 1-3/4" to 2" or 45mm to 50mm
    Zinc Bolt Pattern 3 bolts with 2.875" center to center on the bolts
    125mm - HUB DIAMETER
    Fits Shaft Diameter 125mm: 2" to 2-1/2" or 50mm to 68mm
    Zinc Bolt Pattern 3 bolts with 3.375" center to center on the bolts
    126mm - HUB DIAMETER
    Fits Shaft Diameter 126mm: 1-3/4" to 2" or 45mm to 50mm
    Zinc Bolt Pattern 3 bolts with 2.70" center to center on the bolts
    160mm - HUB DIAMETER
    Fits Shaft Diameter 160mm: 3" to 3-1/2" or 68mm to 80mm
    Zinc Bolt Pattern 3 bolts with 4.45" center to center on the bolts