63-ZIN2B
$ 15.00 USD
| /
Help protect your Max-Prop with a Zinc Anode. Make sure that you always keep the Anodes in good condition. They must be replaced at least once a year.
The Max-Prop Anode has a metal ring molded into it. This metal ring goes around the entire diameter where the screws attach the Anode to the propeller. This ring disburses the electrical current through the entire Anode giving it a much longer life.
Even with the metal ring PYI recommends when installing the zinc that you clean the flat surface of the zinc and the back of the propeller so that you will have good contact between the zinc and the prop. This will greatly increase the life of the Anode.
We only sell Mil Spec Anodes. Individual Anodes do not come with screws.
It's always a good idea to have spare zinc anodes on hand, you never know when you need them. We do offer Zinc Anode Kits which consist of three zinc anodes and all the necessary screws. This is a great cost effective solution versus buying multiple zinc anodes individually.
| 63mm and 90mm - HUB DIAMETER | |
| Fits Shaft Diameter |
63mm: 3/4" to 1-1/8" or 22mm to 28mm 90mm: 3/4" to 1-1/4" or 22mm to 30mm |
| Zinc Bolt Pattern |
3 bolts with 1.82" or 1.7" center to center on the bolts Each zinc has 6 holes to match the two different three hole patterns |
| 70mm and 99mm - HUB DIAMETER |
|
| Fits Shaft Diameter |
70mm: 1-1/8" to 1-3/8" or 30mm to 35mm 99mm: 1-1/4" to 1-1/2" or 30mm to 40mm |
| Zinc Bolt Pattern |
3 bolts with 1.97" center to center on the bolts Each zinc has 6 holes to match the two different three hole patterns |
| 83mm and 110mm - HUB DIAMETER |
|
| Fits Shaft Diameter |
83mm: 1-1/" to 1-3/4" or 35mm to 45mm 110mm: 1-1/2" to 1-3/4" or 35mm to 45mm |
| Zinc Bolt Pattern |
3 bolts with 2.5" or 2.74" center to center on the bolts Each zinc has 6 holes to match the two different three hole patterns |
| 100mm - HUB DIAMETER |
|
| Fits Shaft Diameter | 100mm: 1-3/4" to 2" or 45mm to 50mm |
| Zinc Bolt Pattern | 3 bolts with 2.875" center to center on the bolts |
| 125mm - HUB DIAMETER | |
| Fits Shaft Diameter | 125mm: 2" to 2-1/2" or 50mm to 68mm |
| Zinc Bolt Pattern | 3 bolts with 3.375" center to center on the bolts |
| 126mm - HUB DIAMETER | |
| Fits Shaft Diameter | 126mm: 1-3/4" to 2" or 45mm to 50mm |
| Zinc Bolt Pattern | 3 bolts with 2.70" center to center on the bolts |
| 160mm - HUB DIAMETER | |
| Fits Shaft Diameter | 160mm: 3" to 3-1/2" or 68mm to 80mm |
| Zinc Bolt Pattern | 3 bolts with 4.45" center to center on the bolts |
