Engine Mount Kits for Perkins

41080584KIT

$ 690.00 USD

| /

Size Guide
Description
  • Designed for marine use, accepts propeller and engine thrust in both directions.
  • Offers a fail-safe design.
  • Are height adjustable.
  • Pre-loaded to reduce movement.
  • Slotted holes in the base to assist in alignment.
  • Mount types to fit all applications.

The R&D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust yet soft enough to isolate drivetrain vibrations from the hull.

To help increase the longevity of the mounts, all steel parts are zinc plated and passivated to limit corrosion. The rubber component is covered by an oil shield to protect it from petroleum-based products.

R&D Marine mounts are preloaded based on the combined engine and transmission weight to limit engine movement. To facilitate the ease of installation, the mounts are height adjusting, and the mounting holes in the base of the mount are slotted to assist in the alignment of the drivetrain.

Dimensions

Engine Mount Kit Capacity Per Mount Mount Pre-Loaded Height Adjusting Thickness Max Height Stud Size Deflection
41080584KIT 80 - 230 lbs 0.09" 0.55" 5.38" 5/8" 0.09" - 0.21"
PE24584KIT 80 - 232 lbs 0.09" 0.55" 5.38" 5/8" 0.09" - 0.21"
PE20344KIT 80 - 231 lbs 0.09" 0.43" 6.5" 3/4" 0.09" - 0.21"
PE28345KIT 80 - 233 lbs 0.09" 0.43" 6.5" 3/4" 0.09" - 0.21"
PE11584KIT 120 - 410 lbs 0.09" 0.55" 5.38" 5/8" 0.09" - 0.21"
PE25585KIT 120 - 410 lbs 0.09" 0.55" 5.38" 5/8" 0.09" - 0.21"
PE21344KIT 120 - 410 lbs 0.09" 0.43" 6.5" 3/4" 0.09" - 0.21"
PE29345KIT 120 - 413 lbs 0.09" 0.43" 6.5" 3/4" 0.09" - 0.21"
  • 5 stars: 17 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
Some of the reviews shown are from related products the merchant grouped with this one.
N
Normand St-Pierre
Well built mounts, superb service

I ordered this kit to replace the engine mounts for a Yanmar 4JH-5E on my Valiant 40. The mounts do fit the engine perfectly, but they did not fit the fiberglass braces on the boat. I would have worked on this, but the diesel mechanic said that this was no longer necessary. I contacted PYI and they immediately issued a return number. I have bought fenders and a max-prop from PYI before and I have always been impressed by the quality and the service.

G
Glenn Dudley
Always excellent service

Worked with PYI for the last 16 years, always excellent service, answered all my questions and got my orders out on time and the way I needed them shipped. Technical support has been great.

T
Timothy Moe
Greatest team ever !! @. PYI

Awesome customer service and technical support at the highest engineering level of PYI' s vast marine product inventory is exceptional. !!!!!!!

P
Paul Bailey
Engine Mounts

Not knowing which type of mounts that were your required, your technical support person went over the various types which was extremely helpful since there were no information available from the engine manufacturer.

N
N Haggard
Yanmar replacement mounts

Fits and works great!

R
Ron Ricci
Happy Camper

Great pre-sale customer support!! The mounts were a perfect fit.

I picked these because of the stainless steel shield over the rubber parts. This, along with the coating on the base is a much better design than the Vetus mounts that were replaced. The bolts that hold the mount into the stringers were also replaced since the base is thicker than the old mounts.

N
Norman Facey
Good work!

1) I chatted online with Eric Young who was excellent in helping me to identify my old mounts & provide order number for new
2) a couple days later, once I’d confirmed the old mounts were toast (threads rusted so bad they were unlikely to be adjustable for realignment) I was able to go online & easily order the correct replacements
3) AND specify rapid shipment vis UPS that actually worked across the border and up into rural Canada.
Shipment worked, mounts bolted directly in place, and alignment was easy. Lots o’ stars for PYI.

P
Percy Roberts
5 star all the way

great product and service, set arrived with one mount wrong weight raqnge replacement was overnighted along with prepaid return lable for wrong mount. The R&D mounts are high quality, comparing the original Yanmar mounts to the R&D mounts I'll just say is like comparing a ford pinto to ferrari

O
Otto
Helpful Staff

I called to ask about motor mounts and I was immediately connected to an engineer who helped answer all of my questions about the mounts compatibility and performance. I have not yet installed these mounts on my boat, but I'm confident they'll work great.

J
John D Jackson
Great sales support

Sales assisted for seamless return of incorrect parts. Thanks

F
Frederick Haberlandt
R&D Marine Perkins 4.108 Engine Mounts

Excellent product delivered promptly as requested. However, I erred in ordering. These are not low profile mounts and we're 10 -15 mm too tall to fit my application. All other dimensions were a perfect fit. I regret that I won't be able to observe how these mounts attenuate vibration in service.

L
Leslie chase

Engine Mounts - Max Load 220 - 440 lbs.

L
Leonard Wohlsdorf
Great Improvement on the engine mounting hardware.

Very well made mounts. Company has very knowledgeable techs for any questions you may have to help you modify your current hardware to these pieces. Certainly will use this contact for future purchases.

P
Patrick Dougherty
ENGINE MOUNTS

GREAT SERVICE

M
Michael Lake
5/5

Yanmar Engine Mount Kits

E
Evertt
Best decision I made

I had these installed on my Yanmar 4JH3-HTE 2 years ago and I can say this was the best decision for my boat. Immediately after installing the engine mounts and starting the motor you could feel the difference in the amount vibration that gets transmitted through the hull.
At the advice of my installer (Marine Max) in Coco FL they said to buy the heavy duty mounts for both sides and not just the starboard side as recommended by the manufacturer.
With the reduced vibration and keeping the engine from shifting out of alignment with the shaft these mounts have reduced my amount of repairs and maintenance.

J
Jonathan Mills
Motor mounts

Great got parts within two days

k
kevin wyatt

I HV a inline 6 turbo need part no on motor mount for that motor please

PYI Inc.

Hello Kevin,

I'll need to know some more information to determine the correct engine mounts for your application.

What's the make and model of your engine? Or if that is unknown, what is the weight of the engine and gearbox? I'll also need to know the stud size and bolt spacing of your current engine mounts.

Thank You,
Eric

C
Christian Colton

What is the minimum clearance for the mounts recommended for a perkins 4.108?

PYI Inc.

Hello Chris,

The minimum height of the mount with the adjustment nut all the way down is 3”