Engine Mounts (12mm Stud)

800-038

$ 120.00 USD

| /

Size Guide

Foot Print Minimum Height Weight Capacity per Mount

Description

Designed for marine use, accepts propeller and engine thrust in both directions.
Offers a fail-safe design.
Are height adjustable.
Pre-loaded to reduce movement.
Slotted holes in the base to assist in alignment.
Mount types to fit all applications.

The R&D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust yet soft enough to isolate drivetrain vibrations from the hull.

To help increase the longevity of the mounts, all steel parts are zinc plated and passivated to limit corrosion. The rubber component is covered by an oil shield to protect it from petroleum-based products.

R&D Marine mounts are preloaded based on the combined engine and transmission weight to limit engine movement. To facilitate the ease of installation, the mounts are height adjusting, and the mounting holes in the base of the mount are slotted to assist in the alignment of the drivetrain.

Available for most brands such as Yanmar, Perkins, Universal, Westerbeke, and many more.

Determining Engine Mount Weight Capacity

Below are the formulas to use to determine the required pounds per engine mount.

Formulas

Front Engine Mount

(W x 0.4) x 0.5 = lbs per mount

Back Engine Mount

(W x 0.6) x 0.5 = lbs per mount

W = weight of engine and gearbox

Example:

Total weight of engine and gearbox = 1,200 lbs.

Front Engine Mount

(1,200 x 0.4) x 0.5 = 240 lbs per mount

Back Engine Mount

(1,200 x 0.6) x 0.5 = 360 lbs per mount

General Weight Distribution

R&D Marine Engine Mount weight distribution

Find the center of gravity by balancing on a roller (If possible)
If the center of gravity cannot be found, assume a weight distribution of 60% on the rear engine mounts, with 40% on the front engine mounts (if the rear engine mount is in line with the flywheel)

Technical Specifications

Part #	Stud Size	Capacity Per Mount	Foot Print	Mount Pre-Loaded	Deflection	Minimum Height	Maximum Height
800-038	12mm	30-90 lbs	4"	0.07"	0.07" - 0.14"	2.03"	3.9"
800-039	12mm	70-170 lbs	4"	0.07"	0.07" - 0.14"	2.03"	3.9"

Always excellent service

Worked with PYI for the last 16 years, always excellent service, answered all my questions and got my orders out on time and the way I needed them shipped. Technical support has been great.

Greatest team ever !! @. PYI

Awesome customer service and technical support at the highest engineering level of PYI' s vast marine product inventory is exceptional. !!!!!!!

Engine Mounts

Not knowing which type of mounts that were your required, your technical support person went over the various types which was extremely helpful since there were no information available from the engine manufacturer.

Yanmar replacement mounts

Fits and works great!

Happy Camper

Great pre-sale customer support!! The mounts were a perfect fit.

I picked these because of the stainless steel shield over the rubber parts. This, along with the coating on the base is a much better design than the Vetus mounts that were replaced. The bolts that hold the mount into the stringers were also replaced since the base is thicker than the old mounts.

1 2 3