Earthing Connectors

Earthing Connectors

Earthing Connectors

Earthing Connectors

Earthing Connectors

103-036

$ 90.00 USD

| /

Select Your Earthing Connector

Description
Earthing Connector Application Chart
Installation Procedure

The R&D Marine Earthing Connector consists of a silver impregnated rubber strip, which when fitted through the axis of the coupling between the two fail safe straps gives electrical continuity. R&D Marine have sizes to fit most 910 series couplings. Please refer to the Earthing Connector Application Chart.

Earthing Connector Application Chart

Part #	Size (mm)	To Suite R&D Marine Flexible Coupling
103-036	9 x 57	910-021
103-037	11 x 57	910-001, 910-002, 910-007, 910-013, 910-014, 910-019, 910-020, 910-028, 910-043
103-038	15 x 57	910-004, 910-005
103-039	17 x 57	910-003, 910-006, 910-009, 910-012, 910-036, 910-037, 910-044, 910-052
103-040	19 x 57	910-017, 910-018, 910-025, 910-026
103-041	23 x 57	910-029, 910-038, 910-039, 910-040
103-042	25 x 57	910-032, 910-033
103-043	15 x 75	910-015, 910-016, 910-022, 910-024, 910-046, 910-048, 910-053
103-044	17 x 75	910-030, 910-041, 910-042, 910-047, 910-051

Installation Procedure For Earthing Connectors
1. While carrying out the following procedure, ensure that the connector is not contaminated by grease or dirt.
2. Before fitting the coupling into the drivetrain, remove 2 off bolts holding one of the fail safe straps.
3. Remove the fail safe strap to uncover the hole in the center of the coupling.
4. Roll up the earthing connector (length-ways) as tight as possible.
5. Push into the hole previously uncovered by removing the strap as far as possible.
6. Replace the fail safe strap ensuring that the connector is not damaged, replace 2 off bolts.
7. Check electrical continuity on installation and thereafter at three to six month intervals.

You may also like