• Floor Anchors
  • Floor Anchors
  • Floor Anchors
  • Floor Anchors
  • Floor Anchors
  • Floor Anchors
  • Floor Anchors
  • Floor Anchors
  • Floor Anchors
  • Floor Anchors
  • Floor Anchors
  • Floor Anchors

Floor Anchors


Brand: Floor Anchor



Next →

  • Features
    • Made of brass or stainless steel.
    • Safely hold 500 lbs per unit.
    • Meets ISAF requirements for offshore boats.
    • Opening mechanism is a simple bayonet style, with 1/4 turn lock and release.
    • Can be opened or closed by either a coin or flat head screwdriver.
    • All components permanently attached, no loose pieces to drop in the bilge.

    PYI Floor Anchors are designed and engineered to secure floorboards or lock hinged panels. Available in either brass or 316L stainless steel, they will not corrode, discolor with age or damage the wood surface. These PYI Floor Anchors meet ISAF requirements for offshore boats (category 2.03) and can safely hold 500lbs per unit. The opening mechanism is a simple bayonet style, with 1/4 turn lock and release that will not loosen with age. It can be opend or closed by either a coin or flat head screwdriver with all components permanently attached so you don't have to worry about loose pieces dropping in the bilge. Suitable for 1/2" to 3/4" or 7/8" to 1-1/4" thick floorboards.

  • Includes
    • Floor Anchors
    • Custom countersink “t” cutter
    • All drill bits and tap required
  • For 1/2" Panels

    With 1/2" panels the receiver will sit flush. A minimum of 1" is needed for the sole.

    For 3/4" Panels

    With 3/4" panels you will have a small portion of the receiver above the sole. A minimum of 3/4" is needed for the sole.

    For 3/4" Panels to 1" Panels

    With 3/4" to 1" panels the receiver will sit flush. A minimum of 1" is needed for the sole.

    For 1-1/4" Panels

    With 1-1/4" panels you will have a small portion of the receiver above the sole. A minimum of 3/4" is needed for the sole.

    For 1" Panels

    With 1" panels you will have more of the receiver above the sole. A minimum of 3/4" is needed for the sole.